-----------------------------------------------------------------
Thank You
Network Administration Staff
North Central Kansas Community Network
-----------------------------------------------------------------
>
> .------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
> | Message 1 |
> '------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
> Subject: [Emerald] Need help - how to use SESSION-TIMEOUT with Cisco NAS
> From: "Danny Sinang" <danny@uplink.com.ph>
> Date: Fri, 28 Jan 2000 20:07:57 +0800
>
> Hello.
>
> Can anybody tell me how we could make the SESSION-TIMEOUT attribute work
in
> Cisco NAS's ?
>
> We've been trying to do so for the past week with no success.
>
> Our IOS version is 12.x .
>
> We've checked the Timebanking check box in RadiusNT admin and have put 2
> minutes in the Timeleft field for a PPP configured subaccount.
>
> Hope somebody could help me.
>
> Thanks.
>
> - Danny Sinang
>
>
>
> .------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
> | Message 8 |
> '------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
> Subject: Re: [Emerald] Need help - how to use SESSION-TIMEOUT with Cisco
NAS
> From: "Dale E. Reed Jr." <daler@iea-software.com>
> Date: Fri, 28 Jan 2000 14:17:29 -0800
>
> Danny Sinang wrote:
> >
> > Hello.
> >
> > Can anybody tell me how we could make the SESSION-TIMEOUT attribute work
in
> > Cisco NAS's ?
> >
> > We've been trying to do so for the past week with no success.
> >
> > Our IOS version is 12.x .
> >
> > We've checked the Timebanking check box in RadiusNT admin and have put 2
> > minutes in the Timeleft field for a PPP configured subaccount.
>
> You might need to talk to Cisco. Last I heard, it only worked for a
> login, not a network connection (ie, telnet, not PPP). If radlogin
> shows the session-timeout is getting sent, then its probably a cisco
> issue.
>
>
> --
>
> Dale E. Reed Jr. Emerald and RadiusNT
> __________________________________________
> IEA Software, Inc. www.iea-software.com
>
>
> .------ ------ ------ ------ ------ ------ ------ ------ ------ ------.
> | Message 9 |
> '------ ------ ------ ------ ------ ------ ------ ------ ------ ------'
> Subject: RE: [Emerald] Need help - how to use SESSION-TIMEOUT with Cisco
NAS
> From: "Ronnie Franklin" <ronnie@itexas.net>
> Date: Fri, 28 Jan 2000 16:48:54 -0600
>
> Session-Timeout works just fine for PPP from about 11.3(5) and up.....
>
> No magic, just put it in your service defaults for the account....
>
>
>
> > -----Original Message-----
> > From: emerald-request@iea-software.com
> > [mailto:emerald-request@iea-software.com]On Behalf Of Dale E. Reed Jr.
> > Sent: Friday, January 28, 2000 4:17 PM
> > To: emerald@iea-software.com
> > Cc: support@iea-software.com
> > Subject: Re: [Emerald] Need help - how to use SESSION-TIMEOUT with Cisco
> > NAS
> >
> >
> > Danny Sinang wrote:
> > >
> > > Hello.
> > >
> > > Can anybody tell me how we could make the SESSION-TIMEOUT
> > attribute work in
> > > Cisco NAS's ?
> > >
> > > We've been trying to do so for the past week with no success.
> > >
> > > Our IOS version is 12.x .
> > >
> > > We've checked the Timebanking check box in RadiusNT admin and have put
2
> > > minutes in the Timeleft field for a PPP configured subaccount.
> >
> > You might need to talk to Cisco. Last I heard, it only worked for a
> > login, not a network connection (ie, telnet, not PPP). If radlogin
> > shows the session-timeout is getting sent, then its probably a cisco
> > issue.
> >
> >
> > --
> >
> > Dale E. Reed Jr. Emerald and RadiusNT
> > __________________________________________
> > IEA Software, Inc. www.iea-software.com
> >
> > For more information about this list (including removal) go to:
> > http://www.iea-software.com/support/maillists/liststart
> >
For more information about this list (including removal) go to:
http://www.iea-software.com/support/maillists/liststart