------=_NextPart_000_0011_01BF8CD4.51F131A0
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
Thanks,
Apparently the Login_user vs. Framed_user was causing the timeout.
Brad
----- Original Message -----=20
From: David Routh=20
To: emerald@iea-software.com=20
Sent: Monday, March 13, 2000 9:14 AM
Subject: Re: [Emerald] Static IP
At 08:49 AM 03/13/00 -0600, you wrote:=20
>>>>
We are having some problems setting up users with static IP =
addresses.
Setup is NT4/Radius2.5/3com TC units
for my service i am using the following radius attributes:
User-service Login-user
Framed-protocol PPP
Framed-address xxx.xxx.xxx.xxx
Framed-netmask 255.255.255.255
At the user end, i setup DUN with the specified IP
<<<<
Here's how we do it...
User-Service Framed-User
Framed-Protocol PPP
Framed-Address xxx.xxx.xxx.xxx
We don't use the Framed-Netmask... maybe we should...
But, the above works for us...
Hope that helps,
David
------=_NextPart_000_0011_01BF8CD4.51F131A0
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
------=_NextPart_000_0011_01BF8CD4.51F131A0------- Original Message -----From:=20 David =Routh=20Sent: Monday, March 13, 2000 =9:14=20AMSubject: Re: [Emerald] Static =IPAt 08:49 AM 03/13/00 -0600, you wrote: =
>>>>
We are having some =problems=20 setting up users with static IP =addresses.<<<<
/smaller>/fontfamily>
Setup=20 is NT4/Radius2.5/3com TC =units
/smaller>/fontfamily>
for=20 my service i am using the following radius =attributes:
User-service=20 Login-user
Framed-protocol PPP
Framed-address=20 xxx.xxx.xxx.xxx
Framed-netmask =255.255.255.255
/smaller>/fontfamily>
At=20 the user end, i setup DUN with the specified=20 =IP
/smaller>/fontfamily>
H=ere's=20 how we do it...
User-Service Framed-User
Framed-Protocol=20 PPP
Framed-Address xxx.xxx.xxx.xxx
We don't use the=20 Framed-Netmask... maybe we should...
But, the above works for=20 us...
Hope that helps,
David