I allready tried recycling Radius by shutting down and restarting it..
unfortunatelly there was no effect. I have gotten the same results with
2 different USR Netservers.
> -Kurt
>
> ----------
> > From: Michael Miller <michael@abraxis.com>
> > To: emerald@emerald.iea.com
> > Subject: Emerald support of USR Netserver
> > Date: Thursday, May 15, 1997 10:55 AM
> >
> > Hello all again,
> >
> > I am still trying to get Radius / Emerald to recognize a USRobotics
> > NETServer/16 I server. I agree the proper setting is "starts at 1"
> > however I seem to have another problem. Radius/Emerald will properly
> > acknowledge the authentication request, however is not acknowledging the
> > accounting request, and as a result no connections to the Netserver are
> > logged or displayed on the online status tab. Running radius in debug
> > mode reveals:
> >
> > LOG: Bad authenticator: from Netserver 2 - ID: xxx
> >
> > This would suggest that the Netserver is not sending the proper secret
> > code for authentication. I have the secret set properly in both emerald
> > admin/radius config/servers and in the USR Netserver. I also have tried
> > leaving "require secret for accounting" both checked and unchecked in
> > the Radius Admin and have seen no changes. Anyone know what is going on
> > here?
> >
-- ================================================= /\ Mike A. Miller /--\ \/ Abraxis Networks / \ B R A /\ I S / N E T W O R K S michael@abraxis.com=================================================