Re: [Emerald] NAS Setup
Dale E. Reed Jr. ( (no email) )
Sat, 27 Mar 1999 15:26:48 -0800
Ben Conner wrote:
>
> At 07:13 PM 3/26/99 -0800, you wrote:
> >Ed and Kathy Tate wrote:
> >>
> >> List,
> >>
> >> We have just recently starting running radius NT 2.5 and Emerald 2.5.261.
> >> We are using all Livingston/Lucent PM III's. In
> >> the Emerald Admin when setting up the NAS's it asks for ports and modems.
> >> We are using PRI (1 D Channel Each), 4 10port cards and 1 8prt card giving
> >> us 48ports, but only 46 lines per PM III (due to the single D ch. for each
> >> PRI leaving 23+23 for a total of 46). Should I have it configured in
> >> Emerald admin as 46 ports and 46 modems or as 48 and 48?
> >
> >The modems line is informational only.
> >
> >You should put 48 ports. The PM uses 0 for the s0 port and the first
> >PRI/TC is 1-24 (24 is not used for a PRI). The second WAN is 24-48
> >(48 is not used for a PRI).
>
> Are you saying the numbering for ports on a PRI for a PM3 go from 0-23, skips
> 24, and picks up with 25-46? Wouldn't that leave 46 ports to be defined in the
> ports section? I've had mine defined as 46 rather than 48. What problems
> would that have caused?
No. They go from 1-23 and 25-47. I mistyped the second starting
number.
If you do a starts at 0 and 46 ports, you would be missing the last
port.
--
Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com
For more information about this list, including removal,please see http://www.iea-software.com/maillist.html