Re: [Emerald] NAS Setup
Dale E. Reed Jr. ( (no email) )
Fri, 26 Mar 1999 19:13:45 -0800
Ed and Kathy Tate wrote:
>
> List,
>
> We have just recently starting running radius NT 2.5 and Emerald 2.5.261.
> We are using all Livingston/Lucent PM III's. In
> the Emerald Admin when setting up the NAS's it asks for ports and modems.
> We are using PRI (1 D Channel Each), 4 10port cards and 1 8prt card giving
> us 48ports, but only 46 lines per PM III (due to the single D ch. for each
> PRI leaving 23+23 for a total of 46). Should I have it configured in
> Emerald admin as 46 ports and 46 modems or as 48 and 48?
The modems line is informational only.
You should put 48 ports. The PM uses 0 for the s0 port and the first
PRI/TC is 1-24 (24 is not used for a PRI). The second WAN is 24-48
(48 is not used for a PRI).
--
Dale E. Reed Jr. Emerald and RadiusNT__________________________________________IEA Software, Inc. www.iea-software.com
For more information about this list, including removal,please see http://www.iea-software.com/maillist.html